- Category:
- Spa •
- Spa Maintenance •
If you use Chlorine you should:
Balance:
Test and adjust the total alkalinity, calcium hardness and pH of the water. For recommended ranges, please refer to the Balanced Water Chart.
Sanitize:
Broadcast HTH spa™ Chlorinating Sanitizer over the surface of circulating water. Measure and adjust the free available chlorine (FAC). For startup, do not enter the spa until the FAC level is in the range of 4 - 5 ppm. FAC levels should be maintained in the range of 3 - 5 ppm.
If you use Bromine you should:
Balance:
Test and adjust the total alkalinity, calcium hardness and pH of the water. For recommended ranges, please refer to the Balanced Water Chart.
Sanitize:
Add HTH spa™ Bromine Tablets to the floater (fits all floaters). Test and adjust the bromine residual. Do not enter the spa until the bromine residual level is in the range of 2 – 4 ppm. Bromine levels should be maintained in the range of 2 – 4 ppm.
To convert your spa from bromine to chlorine or vice versa, simply drain your spa and refill it with fresh water.
